EC 1002
Products
IAFCO Units
CENTRAL SYSTEM ELECTRONIC CLEANERS(ELECTROSTATIC AIR FILTERS)
( Installed Separately With Overall Existing Ventilation System)
These can be installed separately with all existing ventilation system Capacity ranges are from 500 c.f.m to 30,000 c.f.m.
These electronic air cleaners are mounted in return air or fresh air duct to remove airborne particles such as dust, soot, pollen, tobacco smoke 0.01 micron in sizes and larger dom the air circulating through it.
CENTRAL SYSTEM ELECTRONIC AIR CLEANERS
( Installed Separately With Overall Existing Ventilation System)
These can be installed separately with all existing ventilation system Capacity ranges are from 500 c.f.m to 30,000 c.f.m.
500-1500 C.F.M.
98% down to 0.01 micron
24" x 26"W x 10" D (30 kg)
24" x 26" x 18" (40 kg)
EC 1003
1501-2500 C.F.M.
98% down to 0.01 micron
24" x 40 "W x 10" D (40 kg)
24" x 40 " x 18" (55 kg)
EC 1004
2500-3500 C.F.M.
98% down to 0.01 micron
44" x 26"W x 10" D (50 kg)
44" x 26" x 18" (70 kg)
EC 1006
3500-5000 C.F.M.
98% down to 0.01 micron
44" x 40 "W x 10" D (60 kg)
44" x 40 " x 18" (85 kg)
Note In case capaacity requirement is above 5000 c.f.m. The combination of two different models can be used or only one unit can be supplied as per Customer's specification.
SELF CONTAINED ELECTRONIC AIR CLEANERS ( STATUS MODEL)
(Fan Or Blower Is Contained Within The Electronic Air Cleaner Unit)
EC 3001
500-1250 C.F.M.
98% down to 0.01 micron
26" x 20" x 18" (35 kg) Ceiling mounting 22" x 18 " x 16" (25 kg) Table mounting
N.B. Any models can be used for 20% Higher in Capacity than the specified C.F.M. if lower efficiency ( Approx. 90%) is desired.
The above specifications can be changed without notice to meet the latest decision on Art and Technique.
INHERENT ADVANTAGES OF ELECTRONIC AIR CLEANER
- Sustained high Collection Efficiency upto 98%
- Capability to Handle Particles of all sizes ( including Sub-Micron Range i.e. 0.01 Micron Sizes)
- Minimum Maintenance & Low cost
- Low power consumption i.e. power required in about 15 watts per 1.000CFM.
TECHNICAL SPECIFICATION
Power Supply : 230V. A.C. 50, Single phase
Test Conducted : As per ASHARE standard 52:76, U.L. 586: 1971(U.S.A.) ARI. 680: 1974: (USA) And U.S.A. Federal Supply Service. F-F-3201 : 1971